CPCD70

CPCD70

聯系我們

留言

General概要	1	Model型號				CPCD 70
	2	Rated Load Capacity額定載重			kg	7000
	3	Load Center載荷中心距			mm	600
Dimensions尺寸	4	Lifting Height起升高度			mm	3000
	5	Free lifting Height自由起升高度			mm	200
	6	Fork Size貨叉尺寸		LxWxH長寬高	mm	1220×150×65
	7	Mast Tilting Angle門架傾角		F/R前后		6/12
	8	Length (without fork)長度（不帶貨叉）			mm	3560
	9	Overall Width寬度			mm	2000
	10	Mast Height After Mast Fall門架落地高度			mm	2500
	11	Lift Height門架起升高度			mm	4365
	12	Overhead Guard Height護頂架高度			mm	2450
	13	Turning Radius轉彎半徑			mm	3370
	14	Front /back Overhang前懸距/后懸			mm	599/710
	15	Min. Right Angle Stacking Width最小直角通道寬度			mm	3040
	16	Wheelbase軸距			mm	2250
	17	Track輪距		Front前	mm	1470
	18			Rear后	mm	1700
	19	Ground Clearance最小離地間隙	Mast門架處		mm	200
	20		Car Center軸中心		mm	240
Tire輪胎	21	Front Tire前輪				（Double)8.25-15-14PR
	22	Rear Tire后輪				8.25-15-14PR
Performance性能	23	Speed速度	Travel運行	Full Load滿載	km/h	28
	24			No load空載	km/h	33
	25		Lifting起升	Full Load滿載	mm/s	410
	26			No load空載	mm/s	480
	27		Lowering下降	Full Load滿載	mm/s	420
	28			No load空載	mm/s	400
	29	Max.Drawbar Pull最大牽引力		Full/No Load滿載/空載	N	56000
	30	Max.Gradeability最大爬坡度		Full/No Load滿載/空載	%	25
Weight重量	31	Total Weight整機重量			kg	9230
Power&Transmission動力與傳動	32	Battery蓄電池	Voltage/Capacity電壓/容量		V/AH	24/80
	33	Engine發動機	Model型號			Quanchai 4J1-115C32
	34		Rated Power/Speed額定功率/轉速		Kw/rpm	85/2200
	35		Max.Torque/Speed最大扭矩/轉速		N.m/rpm	500/1600
	36	Work Pressure工作壓力			Mpa	19.5
	37	Fuel Tank Capacity油箱容積			L	80
	38	Transmission Type制動類型				Automatic機械液力/電子液力